Search | Engineering

订阅投稿

首页工程期刊工程焦点工程成就工程前沿关于我们 English

资源类型

期刊论文 787

年份

2024 1

2023 91

2022 70

2021 95

2020 57

2019 37

2018 29

2017 54

2016 32

2015 36

2014 27

2013 39

2012 40

2011 27

2010 36

2009 39

2008 10

2007 13

2006 7

2005 6

展开︾

关键词

Cu(In 4

DX桩 4

Ga)Se₂ 3

光催化 3

模型试验 3

CCS 2

CO₂利用 2

CO₂封存 2

CO₂捕集 2

pH值 2

二氧化碳 2

低碳发展 2

催化剂 2

碳中和 2

铝电解 2

&alpha 1

(GaxIn1−x)2O3薄膜；带隙可调谐；磁控溅射 1

1860 MPa等级 1

1T/2H-MoS₂ 1

展开︾

检索范围：

排序：展示方式：

Release of elements from municipal solid waste incineration fly ash

Wei WANG, Lei ZHENG, Feng WANG, Xiao WAN, Keqing YIN, Xingbao GAO

《环境科学与工程前沿（英文）》 2010年第4卷第4期页码 482-489 doi: 10.1007/s11783-010-0245-7

摘要： The element-release behavior of municipal solid waste incineration fly ash was explored through leaching test with continuous set-point pH (pH test) and serial single reaction cell (SSRC) tests. First, the relationship between element release and acid neutralizing capacity (ANC) consumption was examined with a pH test. Four types of release behaviors were identified which are characteristic for different elements: (1) release curves that were almost linear with ANC consumption (Ca, Zn, and Cd); (2) release that was significantly faster than ANC (Na, K, and Cl); (3) curves that featured a strong increase with ANC consumption, after a transient release, followed by an almost equal decrease (Si and S); and (4) release that is strongly retarded compared with ANC consumption (Cr, Cu, and Pb). In the SSRC system, it the existence of a pH front and a wash-out phenomenon is demonstrated. Combining the results from the SSRC test with the kinetic analysis of the ANC system in the pH test, it was inferred that less than one-third of the ANC measured from a batch pH titration plays a neutralization role in a field situation. The methodologies described may provide a powerful set of tools for systematic evaluation of element release from solid wastes.

关键词： pH_stat test Serial single reaction cell test (SSRC) leaching heavy metal

HTML PDF 收藏

A Cu-modified active carbon fiber significantly promoted HS and PH simultaneous removal at a low reaction

《环境科学与工程前沿（英文）》 2021年第15卷第6期 doi: 10.1007/s11783-021-1425-3

摘要：

• Cu_0.15-ACF performs the best for H₂S and PH₃ simultaneous removal.

关键词： ACF H₂S PH₃ Cu Low temperature Simultaneous removal

HTML PDF 收藏

催化氧化净化黄磷尾气中的磷和硫

宁平,Hans-JörgBart,王学谦,马丽萍,陈梁

《中国工程科学》 2005年第7卷第6期页码 27-35

摘要： KU2和活性炭都能通过催化氧化过程有效脱除黄磷尾气中的P4sub>，PH3sub>和H2sub>S杂质，随着反应温度和氧含量增加可显著提高净化效果，在最优条件下

关键词：催化剂催化氧化 H2sub>S P4sub> PH3sub> 固定床

HTML PDF 收藏

Kinetics and thermodynamics of the phosphine adsorption on the modified activated carbon

Bingnan REN

《化学科学与工程前沿（英文）》 2011年第5卷第2期页码 203-208 doi: 10.1007/s11705-010-0571-0

摘要： The kinetics and the thermodynamics of phosphine (PH ) adsorption on the modified activated carbon have been explained for the adsorption process of PH . This study investigated the kinetic and thermodynamic properties of PH adsorption on the activated carbon impregnated with 5% HCl solution. The thermodynamic properties including PH adsorption isotherm and adsorption heat were separately investigated at 20°C, 70°C, 90°C. The results showed that the Freundlich-type isotherm equation described the isotherms well. The adsorption capacity increased with increasing temperature between 20°C and 70°C. Between 70°C and 90°C, the adsorption capacity decreased obviously with increasing temperature. The adsorption capacity reached the maximum at 70°C. By analyzing the results of the kinetics and the thermodynamics, we found that the adsorption of PH was dominated by physical adsorption at the lower temperature (20°C). Then with increasing temperature, chemical adsorption gradually dominated in the adsorption process. The adsorption capacity decreased at above 70°C is due to the exothermic effects in the process of adsorption.

关键词： adsorption PH₃ activated carbon kinetics thermodynamics

HTML PDF 收藏

Efficient dechlorination of 2,4-dichlorophenol in an aqueous media with a mild pH using a Pd/TiO

Jiangkun DU,Jianguo BAO,Wei HU

《环境科学与工程前沿（英文）》 2015年第9卷第5期页码 919-928 doi: 10.1007/s11783-015-0794-x

摘要： In this study, palladium-loaded titania nanotubes was fabricated on a titanium plate (Pd/TiO NTs/Ti) for efficient electrodechlorination of 2,4-chlorophenol with a mild pH condition. The nature of Pd/TiO NTs/Ti electrodes was characterized by field-emission scanning electron microscope (FESEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV) techniques. The characterization results indicated the generation of Pd nanoparticles which were evenly dispersed on titania nanotubes arrays on the Pd/TiO NTs/Ti surface. An effective degradation efficiency of up to 91% was achieved within 60 min at cathode potential of −0.7 V ( SCE) and initial pH of 5.5. The effects of the applied cathode potential and initial pH on the degradation efficiency were studied. A near neutral condition was more favorable since very low and very high pHs were not conducive to the dechlorination process. Furthermore, the intermediates analysis showed that the Pd/TiO NTs/Ti electrode could completely remove chlorine from 2, 4-dichlorophenol since only phenol was detected as the byproduct and the concentration of released chlorine ions indicated near-complete dechlorination. This work presents a good alternative technique for eliminating persistent chlorophenols in polluted wastewater without maintaining strong acidic environment.

关键词： Pd/TiO₂NTs/Ti cathode chlorophenols electrocatalytic dechlorination wastewater treatment

HTML PDF 收藏

Co-present Pb(II) accelerates the oxidation of organic contaminants by permanganate: Role of Pb(III)

《环境科学与工程前沿（英文）》 2022年第16卷第8期 doi: 10.1007/s11783-022-1530-y

摘要：

• Simultaneous removal of organic contaminants and Pb(II) was achieved by Mn(VII).

关键词： Permanganate Pb(II) oxidation MnO₂ pH effect

HTML PDF 收藏

H∞sub> control in the frequency domain for a semi-active floor isolation system

Yundong SHI, Tracy C BECKER, Masahiro KURATA, Masayoshi NAKASHIMA

《结构与土木工程前沿（英文）》 2013年第7卷第3期页码 264-275 doi: 10.1007/s11709-013-0214-x

摘要： A floor isolation system installed in a single floor or room in a fixed base structure is designed to protect equipment. With this configuration, the input motions to the floor isolation from the ground motions are filtered by the structure, leaving the majority of the frequency content of the input motion lower than the predominant frequency of the structure. The floor isolation system should minimize the acceleration to protect equipment; however, displacement must also be limited to save floor space, especially with long period motion. Semi-active control with an control was adopted for the floor isolation system and a new input shaping filter was developed to account for the input motion characteristics and enhance the effectiveness of the control. A series of shake table tests for a semi-active floor isolation system using rolling pendulum isolators and a magnetic-rheological damper were performed to validate the control. Passive control using an oil damper was also tested for comparison. The test results show that the control effectively reduced acceleration for short period motions with frequencies close to the predominant frequency of the structure, as well as effectively reduced displacement for long period motions with frequencies close to the natural frequency of the floor isolation system. The control algorithm proved to be more advantageous than passive control because of its capacity to adjust control strategies according to the different motion frequency characteristics.

关键词： semi-active floor isolation H_∞ control MR damper shaping filter shaking table test

HTML PDF 收藏

山西沁水盆地柿庄北区块3#煤层注入埋藏CO2sub>提高煤层气采收率试验和评价

叶建平,张兵,Sam Wong

《中国工程科学》 2012年第14卷第2期页码 38-44

摘要：

对沁水盆地南部柿庄北区块进行了深煤层注入地质和工程评价，认为柿庄北区块适合进行深煤层注入CO2开采煤层气技术的应用；通过SX-001井的微型先导性试验，对SX-001井的注入前后产气量与产水量、气体成分变化和井底压力变化规律进行了总结。通过现场试验，注入CO2后SX-001井的产气量是注入前的2.45倍；在小于煤岩破裂压力的条件下，每天注入20 t的CO2能够实现顺利注入，并且压力上升速度较慢；注入CO2后，煤岩发生膨胀，局部煤层的渗透率降低，排采一段时间后恢复；在目的煤层中注入的CO2的影响范围内，烃类气体总的置换效率达到14.18 cm3/g。该试验成果证明柿庄北区块通过注入CO2开采煤层气实现了CO2的埋藏，提高了煤层气井的采收率。

关键词：山西沁水盆地注入CO2sub> 煤层气采收率

HTML PDF 收藏

脉冲电晕等离子体烟气脱硫工业试验研究

赵君科,王保健,任先文,朱祖良

《中国工程科学》 2002年第4卷第2期页码 74-78

摘要：

利用建造在四川绵阳科学城热电厂的最大烟气处理量为20000 m³/h的脉冲电晕等离子体烟气脱硫工业中试装置，研究了影响脱硫效率的因素，获得了最佳工艺参数。究结果表明，当烟气温度在65～70℃，烟气水分含量约10％，氨硫化学剂量比为1∶1，烟停留时间大于6 s、能耗低于5 Wh/Nm³等条件下，脱硫率达85％以上。

关键词：脉冲电晕放电脱硫工业中试

HTML PDF 收藏

Rh2sub>O3sub>/hexagonal CePO4sub> nanocatalysts for N2sub>O decomposition

Huan Liu, Zhen Ma

《化学科学与工程前沿（英文）》 2017年第11卷第4期页码 586-593 doi: 10.1007/s11705-017-1659-6

摘要： Hexagonal CePO nanorods were prepared by a precipitation method and hexagonal CePO nanowires were prepared by hydrothermal synthesis at 150 °C. Rh(NO ) was then used as a precursor for the impregnation of Rh O onto these CePO materials. The Rh O supported on the CePO nanowires was much more active for the catalytic decomposition of N O than the Rh O supported on CePO nanorods. The stability of both catalysts as a function of time on stream was studied and the influence of the co-feed (CO , O , H O or O /H O) on the N O decomposition was also investigated. The samples were characterized by N adsorption-desorption, inductively coupled plasma optical emission spectroscopy, X-ray diffraction, transmission electron microscopy, X-ray photoelectron microscopy, hydrogen temperature-programmed reduction, oxygen temperature-programmed desorption, and CO temperature-programmed desorption in order to correlate the physicochemical and catalytic properties.

关键词： Rh₂O₃ CePO₄ N₂O decomposition

HTML PDF 收藏

Real drive cycles analysis by ordered power methodology applied to fuel consumption, CO

Pol Masclans Abelló, Vicente Medina Iglesias, M. Antonia de los Santos López, Jesús Álvarez-Flórez

《环境科学与工程前沿（英文）》 2021年第15卷第1期 doi: 10.1007/s11783-020-1296-z

摘要： Abstract • New method named CAbOP is presented based on ordering data according to power. • Three emission models are used and their emission results compared. • Emissions data are analyzed in real driving cycles under CAbOP criteria. • Methodology to collect data and reconstruct lost data in real urban driving cycles. In this work three fuel consumption and exhaust emission models, ADVISOR, VT-MICRO and the European Environmental Agency Emission factors, have been used to obtain fuel consumption (FC) and exhaust emissions. These models have been used at micro-scale, using the two signal treatment methods presented. The manuscript presents: 1) a methodology to collect data in real urban driving cycles, 2) an estimation of FC and tailpipe emissions using some available models in literature, and 3) a novel analysis of the results based on delivered wheel power. The results include Fuel Consumption (FC), CO2, NOx and PM10 emissions, which are derived from the three simulators. In the first part of the paper we present a new procedure for incomplete drive cycle data treatment, which is necessary for real drive cycle acquisition in high density cities. Then the models are used to obtain second by second FC and exhaust emissions. Finally, a new methodology named Cycle Analysis by Ordered Power (CAbOP) is presented and used to compare the results. This method consists in the re-ordering of time dependant data, considering the wheel mechanical power domain instead of the standard time domain. This new strategy allows the 5 situations in drive cycles to be clearly visualized: hard breaking zone, slowdowns, idle or stop zone, sustained speed zone and acceleration zone. The complete methodology is applied in two real drive cycles surveyed in Barcelona (Spain) and the results are compared with a standardized WLTC urban cycle.

关键词： Cycle Analysis by Ordered Power (CAbOP) Micro and macro models Real drive cycle NO_x/PM₁₀/CO₂ emissions Wheel mechanical power domain Worldwide Harmonized Light-Duty Vehicles Test Cycle (WLTC)

HTML PDF 收藏

CO2sub> methanation and co-methanation of CO and CO2sub> over Mn-promoted Ni/Al2sub>O3sub> catalysts

Kechao Zhao,Zhenhua Li,Li Bian

《化学科学与工程前沿（英文）》 2016年第10卷第2期页码 273-280 doi: 10.1007/s11705-016-1563-5

摘要： A series of Mn-promoted 15 wt-% Ni/Al O catalysts were prepared by an incipient wetness impregnation method. The effect of the Mn content on the activity of the Ni/Al O catalysts for CO methanation and the co-methanation of CO and CO in a fixed-bed reactor was investigated. The catalysts were characterized by N physisorption, hydrogen temperature-programmed reduction and desorption, carbon dioxide temperature-programmed desorption, X-ray diffraction and high-resolution transmission electron microscopy. The presence of Mn increased the number of CO adsorption sites and inhibited Ni particle agglomeration due to improved Ni dispersion and weakened interactions between the nickel species and the support. The Mn-promoted 15 wt-% Ni/Al O catalysts had improved CO methanation activity especially at low temperatures (250 to 400 °C). The Mn content was varied from 0.86% to 2.54% and the best CO conversion was achieved with the 1.71Mn-Ni/Al O catalyst. The co-methanation tests on the 1.71Mn-Ni/Al O catalyst indicated that adding Mn markedly enhanced the CO methanation activity especially at low temperatures but it had little influence on the CO methanation performance. CO methanation was more sensitive to the reaction temperature and the space velocity than the CO methanation in the co-methanation process.

关键词： Mn promotion nickel catalysts CO₂ methanation co-methanation of CO and CO₂

HTML PDF 收藏

Simultaneous CO

Jie ZHU,Wei WANG,Xiuning HUA,Zhou XIA,Zhou DENG

《环境科学与工程前沿（英文）》 2015年第9卷第6期页码 1117-1129 doi: 10.1007/s11783-015-0812-z

摘要： The chemical looping concept provided a novel way to achieve carbon separation during the production of energy or substances. In this work, hydrogen generation with inherent CO capture in single packed bed reactor via this concept was discussed. Two oxygen carriers, Fe O 60 wt.% and Fe O 55 wt.%/CuO 5 wt.% supported by Al O , were made by ball milling method. First, according to the characteristics of the reduction breakthrough curve, a strict fuel supply strategy was selected to achieve simultaneous CO capture and H production. Then, in the long term tests using CO as fuel, it was proved that CuO addition improved hydrogen generation with the maximum intensity of 3700 μmol H ·g Fe O compared with Fe-Al of 2300 μmol H ·g Fe O . The overall CO capture efficiency remained 98%–98.8% over 100 cycles. Moreover, the reactivity of deactivated materials was recovered nearly like that of fresh ones by sintering treatment. Finally, two kinds of complex gases consist of CO, H , CH and CO were utilized as fuels to test the feasibility. The results showed all components could be completely converted by Fe-Cu-Al in the reduction stage. The intensity of hydrogen production and the overall CO capture efficiency were in the range of 2000–2400 μmol H ·g Fe O and 89%–95%, respectively.

关键词： CO₂ capture chemical looping hydrogen generation iron based oxygen carriers single packed bed reactor long-term test complex gases fuel

HTML PDF 收藏

含稀释剂的Al-Cr2sub>O3sub>体系燃烧合成反应热力学分析与反应模型

张衍诚,潘冶,张传

《中国工程科学》 2004年第6卷第6期页码 63-67

摘要：

对含稀释剂Al203和Cr203的Al-Cr203体系燃烧合成反应进行了热力学计算与分析，讨论了起始反应温度T0、稀释剂Al2O3和Cr2O3的含量对绝热反应温度7^的影响，并得出T0与Tad在特定温度段上的近似线性关系以及该关系在指导材料成分设计上的应用；揭示了反应驱动力—&mdash

关键词：金属陶瓷燃烧合成 Al-Cr203体系热力学反应模型

HTML PDF 收藏

ZnFe2sub>O4sub> deposited on BiOCl with exposed (001) and (010) facets for photocatalyticreduction of CO2sub> in cyclohexanol

Guixian Song, Xionggang Wu, Feng Xin, Xiaohong Yin

《化学科学与工程前沿（英文）》 2017年第11卷第2期页码 197-204 doi: 10.1007/s11705-016-1606-y

摘要： ZnFe O -BiOCl composites were prepared by both hydrothermal and direct precipitation processes and the structures and properties of the samples were characterized by various instrumental techniques. The samples were then used as catalysts for the photocatalytic reduction of CO in cyclohexanol under ultraviolet irradiation to give cyclohexanone (CH) and cyclohexyl formate (CF). The photocatalytic CO reduction activities over the hydrothermally prepared ZnFe O -BiOCl composites were higher than those over the directly-precipitated composites. This is because compared to the direct-precipitation sample, the ZnFe O nanoparticles in the hydrothermal sample were smaller and more uniformly distributed on the surface of BiOCl and so more heterojunctions were formed. Higher CF and CH yields were obtained for the pure BiOCl and BiOCl composite samples with more exposed (001) facets than for the samples with more exposed (010) facets. This is due to the higher density of oxygen atoms in the exposed (001) facets, which creates more oxygen vacancies, and thereby improves the separation efficiency of the electron-hole pairs. More importantly, irradiation of the (001) facets with ultraviolet light produces photo-generated electrons which is helpful for the reduction of CO to ·CO . The mechanism for the photocatalytic reduction of CO in cyclohexanol over ZnFe O -BiOCl composites with exposed (001) facets involves electron transfer and carbon radical formation.

关键词： reduction of CO₂ cyclohexanol ZnFe₂O₄ deposited BiOCl facet composite photocatalyst